Skip to main content
Home  /  Laser Machines  /  Legacy Systems  /  Fusion M2 32/40
Fusion M2 32/40 Tech Specs

Fusion M2 32/40

Fusion M2 32/40

Series: 14000


Technical specifications of our Fusion M2 32 and M2 40 systems. The Fusion M2 32 and M2 40 are legacy systems of Epilog Laser. See specifications on these unit below.

Technical Specifications


  Laser Machine:

FUSION M2 32

FUSION M2 40

  Work Area:
32″ x 20″
(812 x 508 mm)
40″ x 28″
(1016 x 711 mm)
  Material Thickness:
CO2: 13.5″ (343 mm) (2″ lens)
Fiber: 12.5″ (318 mm) (3″ lens)
Dual Source: 12.5″ (318 mm) (3″ lens)
CO2: 13.25″ (337 mm) (2″ lens)
Fiber: 12.25″ (311 mm) (3″ lens)
Dual Source: 12.25″ (311 mm) (3″ lens)
  Laser Tube Wattages:
CO2: 30, 40, 50, 60, 75, or 120 watts
Fiber: 30 or 50 wattsDual source: CO2 50, 60, or 75 watts;
Fiber 30 or 50 watts
CO2: 30, 40, 50, 60, 75, or 120 watts
Fiber: 30 or 50 wattsDual source: CO2 50, 60, or 75 watts;
Fiber 30 or 50 watts
  Laser Source:
State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
  Intelligent Memory Capacity:
Multiple file storage up to 128 MB.
  Air Assist:
Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.
  Laser Dashboard:
The Laser Dashboard™ controls your Epilog Laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages.
  Red Dot Pointer:
Since the laser beam is invisible, the Red Dot Pointer on the Fusion Laser allows you to have a visual reference for locating where the laser will fire.
  Relocatable Home:
When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Fusion Series Lasers.
  Operating Modes:
Optimized raster, vector or combined modes.
  Motion Control System:
High-speed Brushless DC Servo Motors.
  X-Axis Bearings:
Ground and polished stainless steel Long-Lasting Bearing System.
  Belts:
Kevlar (x-axis) and Steel Cord (y-axis) belts.
  Resolution:
User controlled from 75 to 1200 dpi.
  Speed and Power Control:
Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color.
  Print Interface
10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10.
  Size (W x D x H):
52.5″ x 33.75″ x 40.75″
(1334 x 857 x 1035 mm)
37.75″ (959 mm) deep with exhaust plenum.
60.5″ x 41.25″ x 42.25″
(1537 x 1048 x 1073 mm)
43″ (1092 mm) deep with exhaust plenum.
  Weight:
500 lbs (227 kg)
Dual Source: 536 lbs (243 kg)
643 lbs (292 kg)
Dual Source: 679 lbs (308 kg)
  Electrical Requirements:
Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.
  Maximum Table Weight:
Fusion 32/40: 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting.
  Ventilation:
650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration system is required. There are two output ports, 4″ (102 mm) in diameter. 650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration system is required. There are two output ports, 4″ (102 mm) in diameter.