Fusion 32 / 40 Tech Specs
Series: 13000
Technical specifications of our Fusion 32 and 40 systems. The Fusion 32/40 are legacy systems of Epilog Laser. See specifications on these unit below.
The Fusion is compatible with the latest Software Suite, which comes with several features and benefits to enhance your laser processing experience.
Please note: if you upgrade to the latest version of the Software Suite, your existing .dat files will not be compatible.
Please note: Remove previous version of Epilog Job Manager before installation! (Go to Control Panel > Programs and Features and remove the software.)
Please note: Windows 10/11 is required to use the Epilog Job Manager.
Replaces 1.071
|
Laser Machine: |
Fusion 32 |
Fusion 40 |
|
Work Area: |
32″ x 20″ (812 x 508 mm) | 40″ x 28″ (1016 x 711 mm) |
|
Material Thickness: |
14″ (101.5 mm) | 13.25″ (336 mm) |
|
Laser Tube Wattages: |
30, 40, 50, 60, 75 or 120 watts | |
|
Laser Source: |
CO2, air-cooled, all-metal Waveguide laser tube, 10.6 micrometers. | |
|
Intelligent Memory Buffer: |
Store unlimited files up to 128MB. Rolling buffer allows files of any size to be engraved. | |
|
Print Driver and Software: |
Laser Dashboard, Epilog Control Center, and Epilog Job Manager. | |
|
Air Assist: |
Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface. | |
|
Red Dot Pointer: |
Since the laser beam is invisible, the Red Dot Pointer on Epilog’s Laser Systems allow you to have a visual reference for locating where the laser will fire. | |
|
Operating Modes: |
Optimized raster, vector or combined modes with engraving and cutting in one job. | |
|
Motion Control System: |
High-speed, continuous-loop, DC brushless servomotors using linear and rotary encoding technology for precise positioning. | |
|
X-Axis Bearings: |
Ground and polished stainless steel, teflon coated, self-lubricating bearings. | |
|
Print Interface: |
10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7/8/10. | |
|
Size (W x D x H): |
52.5″ x 35.5″ x 40.75″ (1334 x 851 x 1035 mm) | 60.5″ x 41.25″ x 42.25″ (1537 x 1048 x 1073 mm) |
|
Weight: |
500 lbs (227 kg) Dual Source: 536 lbs (243 kg) | 643 lbs (292 kg) Dual Source: 679 lbs (308 kg) |
|
Electrical Requirements: |
Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. | |
|
Ventilation: |
650 CFM (1104 m3/hr)external exhaust to the outside or internal filtration system required. There are two output ports, each 4″ in diamter. | |
|
Laser System Classification: |
Class 2 Laser Product – 1 mW CW Maximum 600-700 nm. | |