Skip to main content
Fusion Pro 32

Fusion Pro 32

Series: 16000

Technical specifications of our Fusion Pro 32 laser system. The Fusion Pro 32 is a legacy system of Epilog Laser. See specifications on this unit below.
Owner’s Manual
Drivers & Firmware
Tech Specs

Technical Specifications

  Laser Machine:

FUSION PRO 32

Industrial Series
  Work Area:
 32″ x 20″ (812 x 508 mm)
  Material Thickness:
 12.25″ (311 mm)
  Laser Tube Wattages:
 CO2: 50, 60, 80, or 120 watt, air-cooled, metal Waveguide tube, 10.6 micrometers Fiber: 30 or 50 watt, air-cooled, includes collimator. 1064nm
  Software:
 Laser Dashboard™, Epilog Job Manager™
  Intelligent Memory Capacity:
 Multiple file storage up to 64 MB. Engrave any file size.
  Operating Modes:
Optimized Raster, Vector & Combined mode.
  Motion Control System:
 High-speed, continuous-loop, brushless DC servo motors using rotary encoding tech for precise positioning.
  X-Axis Bearings:
 Ground & polished stainless steel, Teflon-coated, self-lubricating bearings. Dual blocks on X-axis for greater rigidity.
  Belts:
 Advanced B-style double-wide Kevlar precision drive belts.
  Resolution:
 User controlled from 75 to 1200 dpi.
  Speed and Power Control:
 165 IPS with 5G acceleration. Computer-controlled in .001 increments up to 100%. Color mapping feature links Speed, Power, Frequency, Raster/Vector mode, & Air Assist On/Off settings to any RGB color.
  Print Interface
 10Base-T Ethernet, USB, or Wireless connection.
  Size (W x D x H):
 54.6″x34.2″x42″ (1387x869x1067mm)
  Weight:
 400lbs (182kg)
  Electrical Requirements:
 Auto-switching power supply 110-240volts, 50 or 60Hz, single phase.
  Ventilation:
 One 400CFM upper output ports. One 400CFM lower port. Total 800CFM. All ports 4″ (102mm) diameter.