Skip to main content
Save now on the Fusion Maker/Edge/Pro 24!
FiberMark S2 landscape

FiberMark S2

Series: 8000

Technical specifications of our FiberMark S2 system. The FiberMark S2 is a legacy system of Epilog Laser. See specifications on this unit below.
Owner’s Manual
Software & Firmware
Tech Specs

Software & Firmware

Epilog Software Suite

Modern Experience

The FiberMark S2 is compatible with the latest Software Suite, which comes with several features and benefits to enhance your laser processing experience.

Please note: if you upgrade to the latest version of the Software Suite, your existing .dat files will not be compatible.

Learn More

Software Suite 2.2.5 (2/1/2021)

Classic Experience
  • Everything you need to run your FiberMark S2 system
  • Installs the Epilog Job Manager and the Epilog Laser Dashboard
  • For more information on the Job Manager, click here.
  • Download install and use instructions.

Version 2.2.5 Release Notes:

  • Bug fixes and improvements

Minimum Requirements:

  • Please note: Windows 10/11 is required to use the Epilog Job Manager.
  • Operating system should have all system updates before installation
  • Support for OpenGL 3.0 (or higher) or OpenGL 2.0ES (or higher)
  • 4GB RAM or more
  • 2 processor cores or more
  • Processor can be any Intel i3/i5/i7, AMD Ryzen 3/5/7, AMD A4/A6/A8/A10/A12/FX
  • Integrated gigabit ethernet required for Fusion M2 vision system. Fusion Pro/Edge does not have the same requirement, but is nice to have.

Recommended Specifications:

  • 8GB RAM or more
  • 4 processor cores or more
  • Processor can be any Intel i5/i7, AMD Ryzen 5/7, AMD A6/A8/A10/A12/FX

Please note: Remove previous version of Epilog Job Manager and Epilog Software Suite before installation! (Go to Control Panel > Programs and Features and remove the software.)

Download 64-bit (x64) Version

Firmware: 1.0.1.6 (02/04/11)

Replaces 1.0.1.5
  • This release addresses CE requirements to stop the motion control system if the access door is opened while the machine is operating.
  • Read Install Instructions.
Download Now (.zip)

Epilog Software Suite

Modern Experience
Learn More

Software Downloads

Classic Experience

Firmware Downloads

Technical Specifications

  Laser Machine:

FiberMark S2 Laser
  Work Area:
 24″ x 12″ (610 x 305 mm)
  Focal Length (F-Theta Lens):
 3″ (76.2 mm)
  Material Thickness:
 5″ (127 mm)
  Laser Tube Wattages:
 30 watts
  Laser Source:
 Solid State Pulsed Ytterbium Fiber Laser (air-cooled).
  Mode of Operation:
 Pulsed 20-80 kHZ.
  Repetition Rate (Frequency):
 20 kHZ – 100 kHz depending on the laser wattage.
  Intelligent Memory Capacity:
 Multiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved.
  Air Assist:
 Attach the included air compressor to our Air Assist to remove heat and combustible gases from the marking surface by directing a constant stream of compressed air across the marking surface.
  Laser Dashboard:
 The Laser Dashboard™ controls your Epilog Laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages.
  Red Dot Pointer:
 Since the laser beam is invisible, the Red Dot Pointer allows you to have a visual reference for locating where the laser will fire.
  Relocatable Home:
 When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position features on the FiberMark 24.
  Operating Modes:
 Raster, vector, or combined modes.
  Motion Control System:
 High-speed, continuous-loop, DC servomotors using linear and rotary encoding technology for precise positioning.
  X-Axis Bearings:
 Ground and polished stainless steel long-lasting bearing system.
  Belts:
 Advanced B-style Kevlar belts.
  Resolution:
 User controlled from 75 to 1200 dpi
  Speed and Power Control:
 Computer or manually control speed and power in 1% increments to 100%. Raster and vector color mapping links speed, power and focus to any RGB color.
  Print Interface:
 10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7/8/10.
  Size (W x D x H):
 34.5″ x 24.5″ x 16″ (876 x 622 x 406 mm)
  Weight:
 120 lbs (55 kg) without stand
  Electrical Requirements:
 Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.
  Maximum Table Weight:
 200 lbs (90 kg) for static and 80 lbs (36 kg) for lifiting.
  Ventilation:
 External exhaust or internal filtration system is required via single 4″ (101.6 mm) output port.