FiberMark 24 Tech Specs
Series: 8000
Technical specifications of our FiberMark 24 system. The FiberMark 24 is a legacy system of Epilog Laser. See specifications on this unit below.
The FiberMark 24 is compatible with the latest Software Suite, which comes with several features and benefits to enhance your laser processing experience.
Please note: if you upgrade to the latest version of the Software Suite, your existing .dat files will not be compatible.
Please note: Remove previous version of Epilog Job Manager before installation! (Go to Control Panel > Programs and Features and remove the software.)
Please note: Windows 10/11 is required to use the Epilog Job Manager.
Replaces 9.01 (08/15/2014)
|
Laser Machine: |
FiberMark 24 |
|
Work Area: |
24″ x 12″ (610 x 305 mm) |
|
Focal Length (F-Theta Lens): |
3″ (76.2 mm) |
|
Material Thickness: |
5″ (127 mm) |
|
Laser Tube Wattages: |
10, 20, 30, or 50 watts |
|
Laser Source: |
Solid State Pulsed Ytterbium Fiber Laser (air-cooled). |
|
Mode of Operation: |
Pulsed 20-80 kHZ. |
|
Repetition Rate (Frequency): |
20 kHZ – 100 kHz depending on the laser wattage. |
|
Intelligent Memory Capacity: |
Multiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved. |
|
Air Assist: |
Attach the included air compressor to our Air Assist to remove heat and combustible gases from the marking surface by directing a constant stream of compressed air across the marking surface. |
|
Laser Dashboard: |
The Laser Dashboard™ controls your Epilog Laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages. |
|
Red Dot Pointer: |
Since the laser beam is invisible, the Red Dot Pointer allows you to have a visual reference for locating where the laser will fire. |
|
Relocatable Home: |
When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position features on the FiberMark 24. |
|
Operating Modes: |
Raster, vector, or combined modes. |
|
Motion Control System: |
High-speed, continuous-loop, DC servomotors using linear and rotary encoding technology for precise positioning. |
|
X-Axis Bearings: |
Ground and polished stainless steel long-lasting bearing system. |
|
Belts: |
Advanced B-style Kevlar belts. |
|
Resolution: |
User controlled from 75 to 1200 dpi |
|
Speed and Power Control: |
Computer or manually control speed and power in 1% increments to 100%. Raster and vector color mapping links speed, power and focus to any RGB color. |
|
Print Interface: |
10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7/8/10. |
|
Size (W x D x H): |
34.5″ x 24.5″ x 16″ (876 x 622 x 406 mm) |
|
Weight: |
120 lbs (55 kg) without stand |
|
Electrical Requirements: |
Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. |
|
Maximum Table Weight: |
200 lbs (90 kg) for static and 80 lbs (36 kg) for lifiting. |
|
Ventilation: |
External exhaust or internal filtration system is required via single 4″ (101.6 mm) output port. |