Skip to main content
Radius Tech Specs

Radius

Series: 4000

Technical specifications for the Radius Laser. The Radius is a legacy system of Epilog Laser. See specifications on this unit below.
Owner’s Manual
Drivers & Firmware
Tech Specs

Drivers & Firmware

XP/2000/Vista/7 (32 bit only)

The Radius Laser is only compatible with 32-bit operating systems.
Download Now

95/98/ME Driver

Firmware & Driver Downloads

Technical Specifications

  Laser Machine:

Radius
  Work Area:
 24″ x 18″ (609 x 457 mm)
  Material Thickness:
 12″ (305 mm)
  Table Size:
 35″ x 21.5″ (889 x 546 mm)
  Intelligent Memory Capacity:
 16 MB Standard.
  Laser Tube Wattages:
 25, 30, 60, 80 or 100 watts
  Motion Control System:
 High-speed, continuous-loop, brushless DC servo motors using rotary encoding tech for precise positioning.
  Speed and Power Control:
 Computer or machine controlled power in 1% increments from 1 to 100%. Color mapping allows up to 17 different power settings per job.
  Cooling:
 30 watt: air cooled, no water cooling required. 60-100 watt: water cooled – external chiller is required. Chiller requires 208-240V, single phase, 15 amp.
  Size (W x D x H):
 33″ x 28″ x 39″ (838 x 711 x 990 mm)
  Weight:
 30 watt: 200 lbs (91 kg). 60-100 watts: 225 lbs (102 kg).
  Safety:
 CDRH Class 1 Enclosure
  Print Interface:
 Windows 95/98 – Parallel printer port.
  Electrical Requirements:
 25 and 30 watt: 120 volt AC/15 amp. 60-100 watts, 208-240 volt, single phase.
  Ventilation:
 External ventilation to the outside is required.