|
Laser Machine: |
|
|
|
Work Area: |
32″ x 20″ (609 x 508 mm) |
24″ x 12″ (609 x 305 mm) |
|
Material Thickness: |
9″ (228 mm) |
9″ (228 mm) |
|
Laser Source: |
State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. |
|
Intelligent Memory Buffer: |
Store unlimited files up to 32 MB. Rolling buffer allows files of any size (32 MB and larger) to be engraved. |
|
Air Assist: |
Air Assist (pump optional), Auto Focus, Red Dot Pointer, 2″ focus lens, relocatable home, flash upgrade electronics. |
|
Laser Dashboard: |
Laser Control Display Panel: 4″ x 3″ LCD displays job graphic, stored file names, speed, power, run time, and more. Drop-down menus provide user control of all laser settings, calibration, and special features. |
|
Operating Modes: |
Optimized raster engraving, vector cutting or combined raster/vector mode. |
|
Motion Control System: |
High-speed, continuous-loop, DC servo motors using linear encoder technology for precise positioning. |
|
X-Axis Bearings: |
Ground and polished stainless steel long-life bearing system. |
|
Belts: |
Advanced B-Style doublewide Kevlar precision drive belts. |
|
Resolution: |
User controlled from 150 to 1200 dpi. |
|
Speed and Power Control: |
Computer or manually controlled speed and power in 1% increments to 100%. Vector color mapping links speed and power settings to any RGB settings. |
|
Print Interface: |
10 Base T Ethernet or Parallel connection. Compatible with Windows XP/2000. |
|
Size (W x D x H): |
38″ wide x 32.5″ deep x 40″ high (965 x 826 x 1016 mm). |
38″ wide x 27″ deep x 41″ high (965 x 685 x 1041 mm). |
|
Weight: |
350 lbs (160 kg) |
325 lbs (147 kg) |
|
Electrical Requirements: |
Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. |
|
Ventilation: |
External exhaust to the outside required. Output diameter at machine is 4″. |
|
|
Safety: |
CDRH Class IIIa |
|
