Legend 36EXT
Series: 9000
Technical specifications of our Legend 36EXT. The Legend 36EXT is a legacy system of Epilog Laser. See specifications on these units below.
The Zing is compatible with the latest Software Suite, which comes with several features and benefits to enhance your laser processing experience.
Please note: if you upgrade to the latest version of the Software Suite, your existing .dat files will not be compatible.
Replaces version 9.02 (9/29/2014)
|
Laser Machine: |
Legend 36EXT |
|
Work Area: |
36″ x 24″ (914 x 610 mm) |
|
Material Thickness: |
12″ (305 mm) |
|
Max material thickness with table removed: |
14″ (355 mm) |
|
Laser Tube Wattages: |
30, 40, 50, 60, 75 or 120 watts |
|
Laser Source: |
State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. |
|
Intelligent Memory Buffer: |
Store unlimited files up to 64MB. Rolling buffer allows files of any size to be engraved. |
|
Air Assist: |
Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface. |
|
Laser Dashboard: |
The Laser Dashboard controls your Epilog Laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages. |
|
Red Dot Pointer: |
Since the laser beam is invisible, the Red Dot Pointer on Epilog’s Laser Systems allow you to have a visual reference for locating where the laser will fire. |
|
Relocatable Home: |
When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Moveable Home Position feature on the Legend Series. |
|
Operating Modes: |
Optimized raster, vector or combined modes with engraving and cutting in one job. |
|
Motion Control System: |
High-speed, continuous-loop, DC brushless servomotors using linear and rotary encoder technology for precise positioning. |
|
X-Axis Bearings: |
Ground and polished stainless steel long-lasting bearings. |
|
Print Interface: |
10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7. |
|
Size (W x D x H): |
50.5″ x 33″ x 42″ (1283 x 838 x 1067 mm) – (120 watt: 36″/914 mm deep). |
|
Weight: |
440 lbs (199 kg) |
|
Electrical Requirements: |
Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. |
|
Super-Silent Cooling Fans: |
64 db (not available on the 120 watt). |
|
Ventilation: |
External exhaust to the outside or internal filtration system required. There are two output ports, each 6″ in diamter. |
|
Laser System Classification: |
Class 2 Laser Product – 1 mW CW Maximum 600-700 nm. |