Fusion Maker Laser Machines
Starter Series - 12, 24, & 36
The Fusion Maker by Epilog Laser is our newest entry-level CO2 laser engraving, cutting, and marking system, combining hobbyist-level pricing with industrial-level engineering. It can produce engraving and cutting projects from a variety of materials including wood, acrylic, textiles, paper, plastic, and much more.
Comprised of the Fusion Maker 12, 24, and 36, all the laser machines in the Maker Series feature Epilog’s revolutionary IRIS™ Camera System that gives laser operators a real-time image of the engraving table so they can quickly and accurately position their artwork on even the most uniquely shaped items.
The Fusion Maker Lasers may be a starter series, but right out of the box, you’ll be experiencing professional-level results.
Request Free Samples and Information
"*" indicates required fields
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
FEATURES: Machine Enhancements Designed to Increase Productivity
The Fusion Maker engraving and cutting machine from Epilog Laser combines our top-of-the-line technology and our latest features into a compact system ideal for those just starting out.
Product features and configurations subject to change without notice.
ACCESSORIES: Upgrade your laser system
-
Pin Table
The Pin Table incorporates movable pins that allow you to raise and support the cutting material in locations where the laser will not be cutting, which helps eliminate backside reflection. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern, and the handy removable surface plate makes it easy to clean up small parts easy without removing the Pin Table. -
Air Assist Pump
This high-quality air compressor blows a constant stream of air across the cutting area, which removes heat and combustible gases from the work area and provides the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system. -
3-Jaw Chuck
With the 3-Jaw Chuck rotary, objects are clamped into the device’s 3-jaw chuck, allowing you to rotate cylindrical or oddly-shaped items in applications that demand more precise alignment. -
Rim-Style
The Rim-Style rotary attachment adds the ability to engrave bottles, glasses, flashlights, or any other cylindrical item. The rotary attachment is as easy to set up as placing your product on the rotary, raising or lowering the scissor lift to level the engraving area, and printing to the laser. -
Floor Stand
An easy-to-use stand for moving your laser around your workspace, this wheeled cart is specially designed for the Fusion Maker and Edge 12 laser machine. It provides you greater versatility within your work environment and the ability to easily transport your machine to different locations. -
1.5″ Lens
Although the standard 2.0-inch lens provides amazing detail, our 1.5-inch lens assembly is designed for the highest-resolution engraving and etching of extremely small fonts. -
4.0″ Lens
The 4″ lens produces a focused beam over a longer vertical distance, which makes it ideal for cutting through very thick materials. -
PhotoLaser Plus Advanced
PhotoLaser Plus takes photo engraving with your Epilog laser to the next level by easily processing photos for engraving on all types of materials. Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.
MATERIAL COMPATIBILITY: Quick guide for your Epilog Laser Machine
-
-
-
-
-
-
-
Material Engrave Cut Acrylic Anodized Aluminum Ceramic Cloth Coated Metals Corian Cork Delrin Fabric Fiberglass Material Engrave Cut Glass Leather Marble Stainless Steel * Brass * Matte Board Melamine Mother of Pearl Mylar Painted Metals Material Engrave Cut Paper Plastic Pressboard Rubber Tile Wood Wood Veneer Titanium * Bare Metals * * CO2 lasers will mark bare metals when coated with a metal marking solution. For more information, visit our laser metal marking page.
Do you have a material you would like us to test? Our Applications Team would be happy to assist you.
| Material | Engrave | Cut |
|---|---|---|
| Acrylic | ||
| Anodized Aluminum | ||
| Ceramic | ||
| Cloth | ||
| Coated Metals | ||
| Corian | ||
| Cork | ||
| Delrin | ||
| Fabric | ||
| Fiberglass |
| Material | Engrave | Cut |
|---|---|---|
| Glass | ||
| Leather | ||
| Marble | ||
| Stainless Steel | * | |
| Brass | * | |
| Matte Board | ||
| Melamine | ||
| Mother of Pearl | ||
| Mylar | ||
| Painted Metals |
| Material | Engrave | Cut |
|---|---|---|
| Paper | ||
| Plastic | ||
| Pressboard | ||
| Rubber | ||
| Tile | ||
| Wood | ||
| Wood Veneer | ||
| Titanium | * | |
| Bare Metals | * | |
* CO2 lasers will mark bare metals when coated with a metal marking solution. For more information, visit our laser metal marking page.
Do you have a material you would like us to test? Our Applications Team would be happy to assist you.
TECHNICAL SPECIFICATIONS: Fusion Maker Laser Machines
The Fusion Maker laser engraving and cutting machines from Epilog are our top-of-the-line entry-level laser systems that feature a compact footprint and the latest technological features, including:
Laser Machine: |
FUSION MAKER 12Starter Series
|
FUSION MAKER 24Starter Series
|
FUSION MAKER 36Starter Series
|
Work Area: |
24″ x 12″ (610 x 305mm) | 24″ x 24″ (610 x 610mm) | 36″ x 24″ (915 x 610 mm) |
Material Thickness: |
7″ (178 mm) | 10″ (254 mm) | 10″ (254 mm) |
Laser Tube Types: |
Air-cooled, metal/ceramic Waveguide tube, 10.6 micrometers. User replaceable. |
||
Laser Tube Wattages: |
CO2: 30, or 40 watts | CO2: 40 watts | CO2: 40 or 50 watts |
IRIS™ Camera System: |
1 overhead | 2 overhead | 2 overhead |
Wireless Connectivity: |
Included | Included | Included |
Included Lenses: |
2″ | 2″ | 2″ |
Optional Lenses: |
1.5″ or 4″ | 1.5″ or 4″ | 1.5″ or 4″ |
Resolution: |
Fully-flexible & user-controlled from 75 – 1200 dpi |
||
Maximum Engraving Speed (inches/meters per second): |
60 IPS (1.5 m/s) with 3.5G acceleration. Computer-controlled in .001 increments up to 100%. Color mapping feature links Speed, Power, Frequency, and Raster/Vector mode. |
||
Print Driver & Software: |
Laser Dashboard™, Epilog Job Manager™ |
||
Internal Memory: |
Store multiple files up to 1 GB. Engrave any file size. |
||
Operating Modes: |
Optimized Raster, Vector, and Combined mode. |
||
Super-Silent Cooling Fans: |
Included | Included | Included |
Motion System: |
High-speed stepper motors |
||
X-Axis Bearings: |
Ground & polished stainless steel, Teflon-coated, self-lubricating bearings. Dual blocks on X-axis for greater rigidity |
||
Belts: |
Advanced B-style double-wide Kevlar precision drive belts. |
||
Job Trace: |
Included | Included | Included |
Auto Focus: |
Included | Included | Included |
Touch Screen: |
Included | Included | Included |
Included Table: |
Honeycomb Cutting Table | Honeycomb Cutting Table | Honeycomb Cutting Table |
Air Assist Pump: |
Optional | Optional | Optional |
Size (W x D x H): |
39.5″ x 26.5″ x 17.9″ 1003 x 673 x 455 mm |
41.52″ x 32.81″ x 38.04″ 1055 x 834 x 967 mm |
53.52″ x 32.81″ x 38.04″ 1359 x 834 x 967 mm |
Weight: |
138 lbs (63 kg) | 225 lbs (102 kg) | 260 lbs (117 kg) |
Electrical: |
110 to 240 volts, 50 or 60 Hz, single phase |
||
Ventilation: |
350-400 CFM (595-680 m3/hr) external exhaust to outside or internal filtration unit required. One output port, 4″ (102 mm) diameter |
||
Safeguard Features: |
Included | Included | Included |
Class: |
Class 2 Laser Product – 1 mW cW MAXIMUM 600-700nm |
||
Technical specifications and product configurations subject to change without notice.