Skip to main content
Home  /  Support  /  Driver Updates  /  Fusion Edge, Maker, Pro, & Galvo Drivers

Software Suite & Firmware

Fusion Edge / Maker / Pro / Galvo
Series: 16000-18000

Signup to receive email notification when a new driver or firmware is available for your laser model.

Signup Now

Software/Firmware for Fusion Maker, Fusion Edge, Fusion Pro, & Fusion Galvo Laser Systems.

Epilog is now offering Mac compatibility!

Welcome to the new Epilog Pulse app! Epilog now has two ways of printing to your Epilog laser system. The traditional Software Suite and the new Epilog Pulse application. Where the traditional Software Suite is only for use with Windows operating systems, the new Pulse application is a true multi-platform print application that can be used with Mac, Linux, other non-Windows operating systems and Windows.

The new Pulse app is a firmware update to your laser, and is not a driver update on your computer. To install the Pulse app, you will need to update the firmware on your laser system to firmware version 1.1.0.2. The app lives in the firmware on your laser system and is compatible with all current Epilog production laser systems except the Galvo G100. Once you have upgraded your firmware, the new Pulse app is accessed from your computer’s browser.

Epilog Software Suite

Version: 2.2.15.1 ( 11/21/2024 )

  • Everything you need to run your Fusion Maker, Edge, Pro, or Galvo system
  • Installs the Epilog Job Manager and the Epilog Laser Dashboard

Version 2.2.15.1 Release Notes

New Features:

  • Added 200 watt laser option (Fusion Pro 36 & 48 only)

Bug Fixes:

  • Miscellaneous fixes and enhancements

– For more information on the Job Manager, click here.
– Download Software Suite install and use instructions.
– For information on how to use the Construction Lines feature, click here

Please note: Remove previous version of Epilog Job Manager and Epilog Software Suite before installation! (Go to Control Panel > Programs and Features and remove the software.)

Minimum Requirements:

  • Windows 7, Windows 8.1, Windows 10, or Windows 11
  • Operating system should have all system updates before installation
  • Support for OpenGL 3.0 (or higher) or OpenGL 2.0ES (or higher)
  • 4GB RAM or more
  • 2 processor cores or more
  • Processor can be any Intel i3/i5/i7, AMD Ryzen 3/5/7, AMD A4/A6/A8/A10/A12/FX
  • Integrated gigabit ethernet is not required, but is nice to have.

Recommended Specifications:

  • 8GB RAM or more
  • 4 processor cores or more
  • Processor can be any Intel i5/i7, AMD Ryzen 5/7, AMD A6/A8/A10/A12/FX

Epilog Software Suite 2.2.15.1


Epilog Firmware

Version: 1.1.1.2 ( 11/21/2024 )


New Features/Enhancements:

  • Various bug fixes & enhancements

Introducing Epilog Pulse:

To upgrade to the new Pulse app you will may need to update your firmware more than once. The firmware update sequence will be to first start at, or upgrade to, firmware version 1.0.8.x, then to firmware version 1.0.9.0, and then to firmware version 1.1.0.2.

Once you have upgraded to firmware version 1.1.0.2 you will be able to open the new Pulse app by typing in the IP Address assigned to your laser into any open browser.

You do not need an internet connection to use the Pulse app. Just connect your computer, tablet or other device to your laser using the standard Ethernet, Wi-Fi, or USB connections.  

To use the new Pulse app, follow the instructions in the Setup Guide found below.


Firmware Downloads:

Enter your current firmware version in the field below to access the latest firmware downloads

If you have older firmware, you can determine your firmware version under Settings (gear icon) > Version on the control panel. If your firmware version is newer, it will be listed at the bottom of the settings menu.

Please note:

To upgrade to the newest firmware version, multiple updates may be necessary.

  • Generally you cannot downgrade to a previous firmware once you have upgraded.
Get Firmware

    Firmware FAQ’s:

    You’ve got questions, we got answers.

    How do I know what firmware version I have?

    If you have older firmware, you can determine your firmware version under Settings (gear icon) > Version on the control panel. If your firmware version is newer, it will be listed at the bottom of the settings menu.

    How often will I receive firmware update notifications?

    If you have signed up for firmware updates, we only send new versions to customers when there are feature updates or large bug fixes. Incremental changes are only released to new production machines, and don’t need to be updated in your machine if you are not experiencing issues.

    What do I do if my firmware update fails?
    • There can be many reasons why a firmware may fail. Often times, trying the update process again can solve the issue.
    • If the update continues to fail, please Contact Support
    I recieved a “critical error has occured” message after firmware update. What should I do?

    This message may appear if the engraver cannot validate the network settings upon bootup. This message generally appears after a successful firmware update.

    For troubleshooting steps, please follow the knowledge base article with the link below.

    Learn More
    How do I update my peripherals?

    Peripheral updates are used to ensure that programmable components in the engraver are able to communicate and operate effectively

    Please find the attachment for an in-depth description.

    Updating the Peripherals.pdf

    Stay up to date!

    Signup to receive email notification when a new driver or firmware is available for your laser model.