Skip to main content
Now through August 2, 2024 we're offering sizzling savings on most models! Click HERE for more details.
Home  /  Laser Machines  /  Legacy Systems  /  FiberMark S2
FiberMark S2

FiberMark S2

FiberMark S2

Series: 8000

Technical specifications of our FiberMark S2 system. The FiberMark S2 is a legacy system of Epilog Laser. See specifications on this unit below.

Technical Specifications

  Laser Machine:

FiberMark S2 Laser

  Work Area:
24″ x 12″
(610 x 305 mm)
  Focal Length (F-Theta Lens):
3″ (76.2 mm)
  Material Thickness:
5″ (127 mm)
  Laser Tube Wattages:
30 watts
  Laser Source:
Solid State Pulsed Ytterbium Fiber Laser (air-cooled).
  Mode of Operation:
Pulsed 20-80 kHZ.
  Repetition Rate (Frequency):
20 kHZ – 100 kHz depending on the laser wattage.
  Intelligent Memory Capacity:
Multiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved.
  Air Assist:
Attach the included air compressor to our Air Assist to remove heat and combustible gases from the marking surface by directing a constant stream of compressed air across the marking surface.
  Laser Dashboard:
The Laser Dashboard™ controls your Epilog Laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages.
  Red Dot Pointer:
Since the laser beam is invisible, the Red Dot Pointer allows you to have a visual reference for locating where the laser will fire.
  Relocatable Home:
When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position features on the FiberMark 24.
  Operating Modes:
Raster, vector, or combined modes.
  Motion Control System:
High-speed, continuous-loop, DC servomotors using linear and rotary encoding technology for precise positioning.
  X-Axis Bearings:
Ground and polished stainless steel long-lasting bearing system.
Advanced B-style Kevlar belts.
User controlled from 75 to 1200 dpi
  Speed and Power Control:
Computer or manually control speed and power in 1% increments to 100%. Raster and vector color mapping links speed, power and focus to any RGB color.
  Print Interface:
10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7/8/10.
  Size (W x D x H):
34.5″ x 24.5″ x 16″
(876 x 622 x 406 mm)
120 lbs (55 kg) without stand
  Electrical Requirements:
Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.
  Maximum Table Weight:
200 lbs (90 kg) for static and 80 lbs (36 kg) for lifiting.
External exhaust or internal filtration system is required via single 4″ (101.6 mm) output port.