Skip to main content
Legend 24EX Tech Specs

Legend EX/TT

Series: 6000-7000

Technical specifications of our Legend 32EX, 24EX, and 24TT. See specifications on these units below.
Owner’s Manual
Drivers & Firmware
Tech Specs

Drivers & Firmware

Firmware: 1.40.12.14 (02/15/08)

  • This version of firmware increases the Auto Focus adjustment distance to accommodate a wider range of focus lenses.
Download Now (.zip)

Firmware Install Instructions

  • Instructions for installing system Firmware.
Download Now

Flashmaster

  • Flashmaster is software used to update the firmware on the Legend EX and TT.
Download Now

CAD Driver

  • This driver is designed as a vector cutting only driver and does not have raster engraving capabilities. This vector only driver can be used with Legend, Legend EX, and TT machines and is Windows XP/2000 compatible.
Download Now

XP/2000/Vista/7 Driver 6.01 (09/06/07)

  • 32 bit only
Download Now

Firmware & Driver Downloads

Technical Specifications

  Laser Machine:

Legend 32EX

Legend 24EX

Legend 24TT
  Work Area:
 32″ x 20″ (812 x 508 mm) 24″ x 20″ (609 x 508 mm) 24″ x 12″ (609 x 305 mm)
  Material Thickness:
 9″ (228 mm) 9″ (228 mm) 6″ (152 mm)
  Table Size:
 37″ x 21″ (940 x 533 mm) 33″ x 21″ (838 x 533 mm) 27.25″ x 13.25″ (692 x 335 mm)
  Laser Source:
 State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
  Intelligent Memory Buffer:
 Store unlimited files up to 32 MB. Rolling buffer allows files of any size (32 MB and larger) to be engraved.
  Air Assist:
 Standard Features – Air Assist (pump optional), Auto Focus, Red Dot Pointer, 2″ focus lens, relocatable home, flash upgrade electronics. Air Assist (pump optional), Auto Focus, Red Dot Pointer, 2″ focus lens, relocatable home, flash upgrade electronics.
  Laser Dashboard:
 Laser Control Display Panel: 4″ x 3″ LCD displays job graphic, stored file names, speed, power, run time, and more. Drop-down menus provide user control of all laser settings, calibration, and special features.
  Operating Modes:
 Optimized raster engraving, vector cutting or combined raster/vector mode.
  Motion Control System:
 High-speed, continuous-loop, DC servo motors using linear encoder technology for precise positioning.
  X-Axis Bearings:
 Ground and polished stainless steel long-life bearing system.
  Belts:
 Advanced B-Style doublewide Kevlar precision drive belts.
  Resolution:
 User controlled from 150 to 1200 dpi.
  Speed and Power Control:
 Computer or manually controlled speed and power in 1% increments to 100%. Vector color mapping links speed and power settings to any RGB settings.
  Print Interface:
 10 Base T Ethernet or Parallel connection. Compatible with Windows XP/2000.
  Size (W x D x H):
 42″ wide x 32.5″ deep x 42″ high (1067 x 826 x 1067 mm) – 120 watt cabinet is 34.5″ deep (876 mm). 38″ wide x 32.5″ deep x 40″ high (965 x 826 x 1016 mm). 32″ wide x 24.5″ deep x 15.75″ high (813 x 622 x 400 mm).
  Weight:
 375 lbs (172 kg) 350 lbs (160 kg) 100 lbs (45.5 kg)
  Electrical Requirements:
 Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.
  Ventilation:
 External exhaust to the outside required. Output diameter at machine is 6″. External exhaust to the outside required. Output diameter at machine is 4″. External exhaust to the outside required. Output diameter at machine is 4″.
  Safety:
 CDRH Class IIIa