Incorporate your personal style into any occasion with these sleek faux-wood chargers. Designed with Thanksgiving in mind, we masked the charger, engraved our Thanksgiving message and then color-filled the design.
Whether you use our design or your own original artwork, these charming custom chargers will be a welcome addition to any gathering. Read on to learn how we did it!
We used a 75-watt Fusion M2 with the following Color Map settings:
Speed: 100% // Power: 70%
Click the "Download Now" button above. This will open a zipped folder that includes the artwork files. Adjust the print settings according to you laser's wattage and choose Center-Center Engraving.
Apply the masking tape to the charger plate. This will allow for a clean and precise color-fill once the charger is engraved.
Locate the center of the charger plate and set it as the Home Position.
Print the file using Center-Center Engraving. Press Go!
Smooth out any edges that may have come loose during the engraving process.
Apply a small amount of spray paint in multiple coats to avoid bleeding. Once dried, remove the mask
Have fun experimenting with the color-fill process. You'll quickly learn how fast and easy it is to take your engraving projects to the next level with this popular technique.
We'll send you a brochure, as well as engraved and cut samples created with the laser.
Visit our full Sample Club for more ideas of what you can create with a laser system from Epilog.
View our full line of Co2 and Fiber laser engraving and cutting systems to see which is right for you.
