Technical specifications of our Legend 24. The Legend 24 is a legacy system of Epilog Laser. See specifications on this unit below.
| Engraving Area | 24" x 18" (609 x 457 mm) |
|
| Maximum Material Thickness | 12" (305 mm) | |
| Maximum Material Length | 36" (914 mm) | |
| Table Size | 35" x 21.5" (889 x 546 mm) | |
| Intelligent Memory | 16 MB Standard. | |
| Laser | 25, 30, 60, 80 or 100 watts. | |
| Venting | External ventilation to the outside is required. | |
| Electrical | 25 and 30 watt: 120 volt AC/15 amp. 60-100 watts, 208-240 volt, single phase. | |
| Power Control | Computer or machine controlled power in 1% increments from 1 to 100%. Color mapping allows up to 17 different power settings per job. | |
| Speed Control | Computer or machine controlled speed in 1% increments from 1 to 100%. Color mapping allows up to 17 different speed settings per job. | |
| Cooling | 30 watt: air cooled, no water cooling required. 60-100 watt: water cooled - external chiller is required. Chiller requires 208-240V, single phase, 15 amp. | |
| Dimensions | 33" wide x 28" deep x 39" high (838 x 711 x 990 mm). | |
| Weight | 30 watt: 200 lbs (91 kg). 60-100 watts: 225 lbs (102 kg). | |
| Safety | CDRH Class 1 Enclosure | |
| Interface | Windows 95/98 - Parallel printer port. |
Have a question we can help you with?
