Laser Cutter

Fusion Maker Laser Machines


The Fusion Maker turns your creative visions into reality in minutes
Epilog Fusion Maker 12 laser engraving machine


Starter Machine

The Fusion Maker by Epilog Laser is our newest entry-level CO2 laser engraving, cutting, and marking system, combining hobbyist-level pricing with industrial-level engineering. It can produce engraving and cutting projects from a variety of materials including wood, acrylic, textiles, paper, plastic, and much more.

The Fusion Maker Laser may be a starter, but right out of the box you’ll be experiencing professional level results.

Closer Look:

Take an in-depth look at the feature-packed Fusion Maker laser machine.

  • High speed engraving
  • Fusion Maker IRIS Camera
  • Fusion Maker touchscreen controls

Discover Epilog’s New Fusion Maker Laser Machine

Entry-level laser, professional-grade results
  • High speed engraving

Discover Epilog’s New Fusion Maker Laser Machine

Entry-level laser, professional-grade results
  • 24" x 12" engraving table
  • Up to 60 IPS (1.5m/s) engraving speeds
  • Available in 30 or 40-watt configurations

Features: Machine Enhancements Designed to Increase Productivity

The Fusion Maker engraving and cutting machine from Epilog Laser combines our top-of-the-line technology and our latest features into a compact system ideal for those just starting out.

Fusion Maker IRIS Camera

IRIS™ Camera Positioning

Fusion Maker touchscreen controls

Touch Screen at the Laser

Epilog Laser headquarters building

Engineered & Manufactured in the USA

Ethernet, USB, and Wireless connections

Network Your Laser Across Your Business

Fusion Maker Safeguard features


Fusion Maker laser head air assist

Air Assist

Radiance Beam Enhancing Optics diagram

Radiance™ Beam Enhancing Optics

CO2 laser tube

CO2 Waveguide Laser Tubes by Epilog

Fusion Maker Epilog Software Suite

1 GB Memory in the Machine

Steel bearings

Long-Life Steel Bearing

High speed engraving

Stepper Motors?

Product features and configurations subject to change without notice.

Accessories: Upgrade your laser system

  • 3-jaw chuck rotary device

    3-Jaw Chuck

    Rotary Attachment

    With the 3-Jaw Chuck rotary, objects are clamped into the device's 3-jaw chuck, allowing you to rotate cylindrical or oddly-shaped items in applications that demand more precise alignment.

  • Rim-style rotary device


    Rotary Attachment

    The Rim-Style rotary attachment adds the ability to engrave bottles, glasses, flashlights, or any other cylindrical item. The rotary attachment is as easy to set up as placing your product on the rotary, raising or lowering the scissor lift to level the engraving area, and printing to the laser.

  • stand accessory for the fusion maker 12 laser machines

    Floor Stand

    Fusion Maker

    An easy-to-use stand for moving your laser around your workspace, this wheeled cart is specially designed for the Fusion Maker and Edge 12 laser machine. It provides you greater versatility within your work environment and the ability to easily transport your machine to different locations.

  • Laser system lenses

    1.5″ Lens

    Highest-Resolution Engraving

    Although the standard 2.0-inch lens provides amazing detail, our 1.5-inch lens assembly is designed for the highest-resolution engraving and etching of extremely small fonts.

  • Laser system lenses

    4.0″ Lens

    Cutting Thicker Materials

    The 4″ lens produces a focused beam over a longer vertical distance, which makes it ideal for cutting through very thick materials.

  • PhotoLaser Plus software and engraved photo samples

    PhotoLaser Plus

    Design Software

    PhotoLaser Plus takes photo engraving with your Epilog laser to the next level by easily processing photos for engraving on all types of materials. Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.

  • Cutting pin table

    Pin Table

    Vector Cutting

    The Pin Table incorporates movable pins that allow you to raise and support the cutting material in locations where the laser will not be cutting, which helps eliminate backside reflection. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern, and the handy removable surface plate makes it easy to clean up small parts easy without removing the Pin Table.

  • air compressor for the air assist feature for clean cuts

    Air Assist Pump


    This high-quality air compressor blows a constant stream of air across the cutting area, which removes heat and combustible gases from the work area and provides the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system.

    Material Compatibility: Quick guide for your Epilog Laser Machine

    • Material Engrave Cut
      Anodized Aluminum
      Coated Metals
      Stainless Steel *
      Brass *
      Material Engrave Cut
      Matte Board
      Mother of Pearl
      Painted Metals
      Wood Veneer
      Titanium *
      Bare Metals *

      * CO2 lasers will mark bare metals when coated with a metal marking solution. For more information, visit our laser metal marking page.

      Do you have a material you would like us to test? Our Applications Team would be happy to assist you.

    Technical Specifications: Fusion Maker Laser Machines

    The Fusion Maker laser engraving and cutting machines from Epilog are our top-of-the-line entry-level laser systems that feature a compact footprint and the latest technological features, including:

      Laser Machine:


    Starter Machine
    Fusion Maker 12 laser machine
      Work Area:
    24" x 12" (610 x 305mm)
      Material Thickness:
    7" (178 mm)
      Laser Tube Types:
    Air-cooled, metal/ceramic Waveguide tube, 10.6 micrometers. User replaceable.
      Laser Tube Wattages:
    CO2: 30, or 40 watts
      IRIS™ Camera System:
    1 overhead
      Wireless Connectivity:
      Included Lenses:
      Optional Lenses:
    1.5" or 4"
    Fully-flexible & user-controlled from 75 – 1200 dpi
      Maximum Engraving Speed (inches/meters per second):
    60 IPS (1.5 m/s) with 3.5G acceleration. Computer-controlled in .001 increments up to 100%. Color mapping feature links Speed, Power, Frequency, and Raster/Vector mode.
      Print Driver & Software:
    Laser Dashboard™, Epilog Job Manager™
      Internal Memory:
    Store multiple files up to 1 GB. Engrave any file size.
      Operating Modes:
    Optimized Raster, Vector, and Combined mode.
      Super-Silent Cooling Fans:
      Motion System:
    High-speed stepper motors
      X-Axis Bearings:
    Ground & polished stainless steel, Teflon-coated, self-lubricating bearings. Dual blocks on X-axis for greater rigidity
    Advanced B-style double-wide Kevlar precision drive belts.
      Job Trace:
      Auto Focus:
      Touch Screen:
      Included Table:
    Honeycomb Cutting Table
      Air Assist Pump:
      Size (W x D x H):
    39.5″ x 26.5″ x 17.9″
    1003 x 673 x 455 mm
    138 lbs (63 kg)
    110 to 240 volts, 50 or 60 Hz, single phase
    350-400 CFM (595-680 m3/hr) external exhaust to outside or internal filtration unit required. One output port, 4" (102 mm) diameter
      Safeguard Features:
    Class 2 Laser Product - 1 mW cW MAXIMUM 600-700nm

    Technical specifications and product configurations subject to change without notice.

    Request More Information

    Receive brochures and samples, and get more info from us or your local distributor.

    help desk software