||24" x 12"
(610 x 305 mm)
|Focal Length (F-Theta Lens)
||3" (76.2 mm)
|Maximum Material Thickness
||5" (127 mm)
||10, 20, 30, or 50 watts
||Solid State Pulsed Ytterbium Fiber Laser (air-cooled).
|Mode of Operation
||Pulsed 20-80 kHZ.
|Repetition Rate (Frequency)
||20 kHZ - 100 kHz depending on the laser wattage.
|Intelligent Memory Capacity
||Multiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved.
||Attach the included air compressor to our Air Assist to remove heat and combustible gases from the marking surface by directing a constant stream of compressed air across the marking surface.
||The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.
|Red Dot Pointer
||Since the laser beam is invisible, the Red Dot Pointer allows you to have a visual reference for locating where the laser will fire.
||When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position features on the FiberMark 24.
||Raster, vector, or combined modes.
|Motion Control System
||High-speed, continuous-loop, DC servomotors using linear and rotary encoding technology for precise positioning.
||Ground and polished stainless steel long-lasting bearing system.
||Advanced B-style Kevlar belts.
||User controlled from 75 to 1200 dpi |
|Speed and Power Control
||Computer or manually control speed and power in 1% increments to 100%. Raster and vector color mapping links speed, power and focus to any RGB color. |
||10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7/8/10. |
|Size (W x D x H)
||34.5" x 24.5" x 16"
(876 x 622 x 406 mm)
||120 lbs (55 kg) without stand |
||Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.
|Maximum Table Weight
||200 lbs (90 kg) for static and 80 lbs (36 kg) for lifiting.
||External exhaust or internal filtration system is required via single 4" (101.6 mm) output port.