Radius Technical Specifications

Max Engraving Area 24" x 18" (609 x 457 mm)
Max Material Thickness 12" (304 mm)
Maximum Material Length

36" (914 mm)

Table Size 35" x 21.5" (889 x 546 mm)
Memory Buffer 16 MB standard
Laser 25/30/60/80/100 CO2
Venting

External ventilation to the outside is required.

Electrical 25/30 watt: 120 volt AC/15 amp
60/80/100 watt: 208-240 volt AC/15 amp single phase
Power Control Computer or machine controlled power in 1% increments from 0 to 100%. Color mapping allows up to 17 different power settings per job.
Speed Control

Computer or machine controlled speed in 1% increments from 1 to 100%. Color mapping allows up to 17 different speed settings per job.

  Cooling 30 watt: Air cooled - no external cooling required.
60/80/100 watt: Water cooled - external chiller is required. Chiller requires 208-240V, single phase, 15 amp.
  Dimensions 33" wide x 28" deep x 39" high (838 x 711 x 990 mm)
  Weight 30 watt: 200 lbs (91 kg)
60/80/100 watt: 225 lbs (102 kg)
  Safety CDRH Class 1 Enclosure
  Interface Windows 95/98 - Parallel printer port


Site Map
16371 Table Mountain Parkway · Golden, CO 80403· 888-437-4564
sales@epiloglaser.com · © Epilog Laser 2005